FAQ

What is LC20?
An oil anti-oxident that also emulsify carbonaceous deposits, provides an extra measure of lubricity, provides extra rust control, works with all mineral and synthetic motor oil, power steering, and automatic transmission systems.

Former recommended dosage is 1 Oz (30 ml) per 1 quart (0.95 lit) of Motor oil during oil change. So if your oil change requires 4 lit of motor, add in 4 Oz of LC20. Thereafter, every 1600Km or more, add 1 Oz of LC20 as a topup dosage. Check Oil level. Do not overfill crankcase.

In view that many of us owes a car that's under manufacturer's warranty in Singapore, below is new recommendations for local usage.
2 Oz per quart initial and 2-3 Oz topup every 3500Km. Check Oil level. Do not overfill crankcase.

Why must I topup with 2-3 Oz LC20 every 1600Km or more? Can I omit this?
The topup is meant to recharge the anti-oxidation properties of LC20 as that part of LC20 gets used up. You can omit this but will not get best results. Other properties of LC20, e.g. lubrication, etc is still present

But its so troublesome to fill up every 1600KM. Can I fill up every 3000Km or 5000Km?
Yes. This is better than not using LC20 at all.

What is FP60?
A fuel system cleaner, a fuel injector cleaner, a fuel treatment, a fuel pump lube, it removes water from the fuel tank, it removes carbon, protects against rust and best of all magically improves combustion efficiency. Works with both petrol and diesel vehicles

Recommended dosage is 1 Oz (30 ml) per 5 Gallon (20 lit) of petrol or diesel.

Can I use FP60 without LC20 or vice versa?
Of course you can. However both products is designed to work synergistically together to keep the engine clean. FP60 cleans the upper combustion chamber while LC20 works in the lower crankcase.

Will FP60 improve the octane rating of petrol?
Has not been rated.

My car is rated for min RON 95. Can I use RON 92?
FP60 contains compounds that clean the combustion chamber(cc) and fuel system, and provides a more even rate of burning. Thus there are less carbonaceous materials present to cause hot spots in the cc which can results in pre-ignition and knocks (pinging). It also provides some extra energy from its concentrated ingredients. The net effect is that some people can use a lower octance fuel when using FP60.

How much mileage improvement can I expect with FP usage?
FP60 is not primarily designed to improve Fuel Consumption. Its designed to be a engine cleaner. However a cleaner engine is a more efficient engine. With a more efficient engine, it should use less fuel. Reports of 5-15% improvements is typical though others don't see any due to many possible factors.

My mileage drops in my first application. HELP!!
Many users have experience a drop in mileage upon first use. This is partly due to FP60 starting to do its cleaning. It should go back to normal or better within a tank or 2.

Must I use FP60 every tankful? I don’t need to do this with other products.
FP60 is designed as a very gentle cleaner and does not contain any harsh solvent that may cause harm especially to seals. FP60 also treats the fuel you pump in to burn better and gives extra solvency to the fuel mixture.

Will FP60 effect the oxygen sensor in my car?
We have had no complaints of this happening.